NSN: 4460-01-462-4776

Versatile mobile HEPA filtration designed and ideally suited for use at welding workplaces. The extracted air is first fed into a pre-filter where large particles are captured and then through a main filter where the welding smoke is cleaned with a filter efficiency rating above 99.9%. This means that even the smallest particles down to a size of 0.3 micron are filtered.

The filter only needs to be changed once or twice a year depending on the number of working hours and the substances to be captured.

• 18 ga. steel construction with durable powder coat finish
• 5 in. diameter rubber castors with locking feature
• 10 ft. x 6 in. extraction arm can be swiveled through 360 degrees
• Conveniently located top control panel featuring:
  • On-off switch | Operating control light
  • Filter monitor light | Fan rotation direction indicator
  • Plug for automatic start-stop
• Cable holder for power cable storage
• Front-loading pre-filter and 99.9% HEPA filter, standard; optional carbon filter

Specifications:

• Suction Capacity: 680 cfm
• Motor Power: 1.5 hp
• Voltage: 115 v, 1 phase, 20 amp service; 13 amps start
• Filter Efficiency: >99.9%
• Dimensions: 25.8" l x 25.8" w x 42.2" h
• Weight (without arm): 170 lbs.